What is shift on the go transmission

A Shift-on-the-Go transmission allows you to change speeds without clutching or stopping. A hand-controlled hydrostatic transmission provides smooth drive control without stepping on a pedal. An automatic or hydrostatic foot-controlled transmission drives just like a car.

How do you shift a riding lawn mower?

If you need to change gears while mowing, you do not have to disengage the blades. Simply push the brake and clutch pedal, shift to your new desired gear, and release the brake and clutch pedal. Always wear long pants, safety glasses and hearing protection when operating a riding lawn mower to prevent bodily injury.

Why does my riding mower not move?

If your riding lawn mower won’t drive forward or slows down when you go uphill, check the drive belt. Reinstall the lawn tractor or riding mower drive belt if it’s slipped out of place. Replace it if it’s damaged or broken.

Why won't my riding mower go forward or reverse?

A blocked fuel filter can keep gasoline from flowing to your mower’s engine in adequate supply, resulting in a lawn mower that isn’t drivable. Damaged or clogged air filters also can prevent your lawn mower from going forward or in reverse simply because the engine will overheat quickly.

Who builds Troy-Bilt riding mowers?

Troy-Bilt is a brand owned by MTD Products which is based in Cleveland, Ohio. The Troy-Bilt brand includes items like zero-turn, riding and walk-behind lawn mowers, trimmers and gardening power equipment.

👉 For more insights, check out this resource.

How do I know if my lawnmower transmission is bad?

To check the transmission, carefully watch the transmission when the engine is running. If the pulley is spinning, and the wheels aren’t turning, the transmission is bad. Unfortunately, if this is broken, it may be time to buy a new mower because this part is generally unreplaceable.

Do riding lawn mowers have transmissions?

Three primary transmission systems are used in riding mowers and the various classes of mowing tractors. Mower decks are designed to operate at a constant speed – typically full engine speed. This means adjustments in vehicle speed have to come from the transmission, not by varying the engine speed.

👉 Discover more in this in-depth guide.

What causes a hydrostatic transmission to slip?

By far, the most common reason for hydrostatic transmission failure is old hydraulic fluid. John Deere states that “Operating outside of the recommended oil air temperature range may cause premature hydrostatic transmission failure.” Oil must be changed when its anti-foam additive decays.

What makes a riding mower move forward?

In order to be able to move the mower forward, you must have these drive release handles in the “operating” position. The drive release can be in the form of a lever, push/pull button, or knob.

Why does my Craftsman riding mower not move?

Check for hydro-static fluid leak or low fluid. Check clutch to see if it is engaging when you switch on, if not check battery condition as it needs good charged battery 12.4 +Volts to engage clutch normally, also could be bad wire/plug/switch for clutch, Control linkage out of adjustment, Internal pump damage.

Article first time published on

How does a lawn tractor hydrostatic transmission work?

Usually powered by a standard engine, the hydrostatic pump uses pressurized oil to move pistons in the hydrostatic drive system. The movement of the pistons transfers power to the hydrostatic motors, which then engage the drive wheels on your lawn mower.

Which is better Cub Cadet or Troy Bilt?

Verdict: Which is Better: Troy Bilt or Cub Cadet? If your primary concern is budget and getting the job done, a more straightforward choice would be the Troy Bilt. However, if you’re in the market to spend a little extra cash, you’ll feel a lot better after using the user-friendly Cub Cadet snowblower.

What is the most reliable riding mower?

• Best Overall: RYOBI 42 in. …
• Best Budget: Troy-Bilt 30 in. …
• Best Electric: RYOBI Electric Rear Engine Riding Lawn Mower at Home Depot. …
• Best for Large Yards: Toro 54 in. …
• Best for Rough Terrain: Cub Cadet Ultima ZT1 50 in.

Are Troy Bilt and Craftsman the same?

MTD Products is an American manufacturer of outdoor power equipment for the mass market. … Over the years, MTD acquired the Troy-Bilt, Bolens, Cub Cadet, Craftsman (owned by its minority partner), and Yard-Man brands and/or companies.

Do push lawn mowers have transmissions?

Lawn mowers with hydrostatic transmissions are powered by a hydraulic motor combined with a hydraulic pump. They allow you to mow through a wide range of speeds, instead of moving at preset gear speeds. … Some lawn mowers with hydrostatic transmission also come with a cruise control function.

Is hydrostatic transmission better than automatic?

A hydrostatic transmission works like an automatic transmission, but uses fluid rather than belts to transfer power from the engine to the wheels. This transmission offers a smoother ride, requires less maintenance and lasts longer.

How long do hydrostatic transmissions last?

I believe that most hystat transmissions on smaller tractors should last 3 – 5000 hours plus if they have been serviced regularly (strictly my opinion, not based on data).

Where's the choke on a lawn mower?

There’s a variety of lawn mowers, but for an internal combustion engine, the choke valve is usually located on the body of the engine or a lever on the handle. Most choke valves are butterfly valves mounted in the manifold up from the carburetor jet.

What is the average lifespan of a riding lawn mower?

Riding lawnmowers build to last many years. Our research shows that you can expect a life greater than 10 years. In hours this will be around 500 to 1000 hours. With proper care and maintenance, many can last even 15 to 20 years.

What oil goes in a hydrostatic transmission?

The fluid recommended for Hydro-Gear transmissions and pumps is a 20W-50 motor oil or 15W-50 synthetic motor oil. If the machine has oil reservoirs, they are mounted to the frame behind the seat, for easy access and oil level check accessibility.

Can you adjust a hydrostatic transmission?

Hydrostatic transmissions feature control rod linkage from the speed control lever (or foot pedal on some models) to the hydrostatic transmission. … These control rods are adjustable. By rotating the threaded linkage connector ferrules, the length and the resulting range of movement at the regulator valve can be altered.

Does a hydrostatic transmission have a clutch?

Hydrostatic transmission is most common in tractors. … There are no provisions for a clutch or a need for changing gears with this kind of transmission. To change speeds the operator simply moves the speed selector in the direction that represents the desired reaction.

Why did my Cub Cadet stop moving?

Check the pedals for damage or obstruction. Also check the parking brake to see if it’s engaged, a condition that will also prevent your mower from moving. If you’ve depressed the parking brake and it doesn’t release properly, inspect for obstructions or damage to the linkage.

What are the disadvantages of hydrostatic transmission?

• Overly Responsive. Vehicles with a hydrostatic transmission have to be driven with extreme care when it comes to acceleration and gears. …
• Inefficient. HST is not known for engine efficiency. …
• Expensive. HST vehicles are oil guzzlers.

What happens if you push a hydrostatic mower?

You can’t push hydrostatic mowers without disengaging the transmission. Fluid is pumped to the wheels to turn them, so if the motor is off the pump is too and the wheels won’t turn. If you push the mower when it’s off, the fluid already at the wheels will flow back into the pump and damage it.

What is a hydrostatic transmission?

The hydrostatic transmission transmits energy using hydraulic fluid. The usual transmission has two hydraulic devices; one working as a variable displacement pump and the other working as a motor connected by hydraulic lines. … As a result the hydrostatic transmission does not require any starting clutch.

Are hydrostatic tractors good?

If your tractor will be primarily used for lawn and garden chores or with attachments that don’t require consistent speed, a hydrostatic transmission tractor may be the best choice and offers a variety of benefits. Easy to operate – simplified high-to-low lever to shift, no clutch to depress.

How do you fill a hydrostatic transmission on a lawn tractor?

Slide the transmission oil drain pan from under the transmission oil filter. Fill the hydrostatic transmission oil filter reservoirs with new hydrostatic transmission oil. Pour the transmission oil into the reservoirs by hand. Fill the oil reservoir to the full line that is embossed on the side of the reservoir tank.

Why is my lawn mower turning over but not starting?

Q. Why is my lawn mower turning over but not starting? The most likely reason is bad gas. Gas that sits for many months during the off-season will eventually break down, gumming up the fuel line and carburetor in the engine and preventing it from starting.

Are all riding mowers hydrostatic?

Zero Turn and Rear Engine Rider Transmissions Not every rear engine riding mower uses a hydrostatic transmission; some brands still produce rear-engine riders with gear-based transmission systems.

What is the advantage of hydrostatic transmission?

Advantages of a hydrostatic transmission include power transmission to remote areas, infinitely variable speed control, self-overload protection, reverse rotation capability, dynamic braking, and a high power-to-weight ratio.